Pv Solar Mounting Systems
Warranty:10years
Material:Q355B Steel
Surface Treatment: hot-dip Galvanized
Color: Silver
Engineering Service
Certificate : CE/ISO9001
product details
Product name:pole mount solar panel bracket
Wind Load:60M/s
Snow Load:1.5KN/m2
Application:PV Solar Panel Installation
Warranty:10years
Material:Q355B Steel
Surface Treatment:hot-dip Galvanized
Color:Silver
Engineering Service
Certificate :CE/ISO9001
We are a manufacturer or factory,there are many Pv Solar Mounting Systems made in china.please sent us with the order and the Pv Solar Mounting Systems specification,then we will off the quotation in a price for sale.
Single column fixed solar support
(1)solar Panels can be placed horizontally or vertically.
(2)Product Characters:
a. Single column solar panel structure,high adaptability to different terrain and environment
b. High preinstallation and rapid installation
c. No need to weld at the project site
d. No need to level the land
e. Save construction costs
f. Suitable for ground mounting installation, the foundation is cement pile or ground pile
Solar Ground Mounting System
1. High stability
The fixed photovoltaic bracket uses a robust structural design, which can maintain stability under various climatic conditions and reliably support photovoltaic modules
2. Low maintenance cost
The fixed photovoltaic bracket has no moving parts, simple structure,relatively convenient production and installation, so the main tenance cost is relatively low.
3. Wide applicability
The fixed photovoltaic bracket is suitable for a variety of sites, including roofs, ground, hillsides, etc. Whether it is urban or rural, the fixed photovoltaic bracket can be flexibly applied.
4.Long life
The service life of the fixed photovoltaic bracket is long, generally reaching more than 30 years.
Adjustable Solar Ground Mounting System
1. Adjustable Angle
The photovoltaic panel adjusting bracket usually supports manual or automatic Angle adjustment, which can make the photovoltaic panel always perpendicular to the sun and improve power generation efficiency.
2. Good stability
The photovoltaic panel adjusting bracket is generally made of aluminum alloy, stainless steel and other materials, with stable structure, strong corrosion resistance, and stable support for photovoltaic panels.
3.Be flexible
The photovoltaic panel adjusting bracket can be flexibly arranged and is not limited by terrain.
4.Easy maintenance
The installation of bracket and components
(a)Installation of fixed solar panels The installation of solar panels should be carried out from the bottom up,step by step, and be horizontal and vertical, the spacing of panels in the same side should be consistent, and attention should also be paid to the direction of panel wiring. When the panel is fixed, the component is fixed on the chain with bolts in the steel structure, and the double thom gasket added between the panel and the guide rail. After the middle fixture and the side fixture are set, the nut is locked.
(b) Panel connection
Determine the connection mode of the panel according to the design drawing, and pay attention not to reverse the positive and negative terminals when wiring to ensure that the wiring is correct. After each panel connected, check whether the panel string break voltage is correct.After connecting, disconnect the line on the panel and carry out the subsequent process operation.
| mounting type | ground solar mounting system |
| application | pv solar panel installation |
| material | magnesium aluminum zinc |
| pre-galvanized steel | |
| hot dipped galvanized carbon steel | |
| aluminum alloy | |
| surface treatment | andoized hot dip galvanized |
| installation site | solar energy system |
| color | customized color |
| feature | quick installation |
| certificate | ce/ISO9001 |
| standard | international standards |
| applicable area | flat land,gentle slope, marsh,farm |
| tilt angle | 0-70° |
| service life | 25years |
| pile foundation form | driven pile/cast-in-place pile/cement foundation /screw pile |
| our service and advantages | professional customization service |
Qingdao Jiudingli Steel Structure Engineering Co., Ltd. was founded in 2003.The company is located in Jiaozhou City, Qingdao, Shandong Province, China.The company is mainly engaged in the production and manufacturing of solar bracket transmission line towers,substation steel structures,communication towers etc.
The company have production license of 500KV and 750KV transmission line tower.the whole series of communication,radio,television tower.The company have Steel Structure Professional Contracting Grade ll Qualification We have exported more than 10 countries like USA, Mexico, Spain, Russia, india etc Solar photovoltaic brackets combined with solar cells can bring us very large energy benefits
The transmission tower is the support point of the overhead line, and the erection of a loop on the transmission tower is a single-loop transmission tower, and the erection of two loops on the transmission tower is a double-loop transmission tower.
Why Choose Us
| 1 Good quality control | 3 State-of-art technology products | 5 Smooth communication | ||
| 2 Highly competitive prices | 4 Best professional team oflife style consumer electronics | 6 Effiective OEM&ODM service |
Hot Tags: pv solar mounting systems, China pv solar mounting systems manufacturers, suppliers, factory, mounting systems for solar panels, mounts for solar panels, solar panel brackets mountings, solar panel roof mount, pv mounting, mounting solar panels
You Might Also Like
Send Inquiry